How to Make your chemical dollar go further Suggestion #3

Continuation:

Our third suggestion is to stretch your cleaner as far as you can to still get the results you need. Most people, pressure washers included, tend to think more is better. Twice the dirt means you should use twice the cleaner, and that is just not true. Many times the more soap you add the harder it gets to get it clean. Sometimes all you need is hotter water to make the soap you already have do the job better. That is why our dilution rates are doubled with cold water. Turn up the heat and you will increase the cleaning power of the soap you already are using. Always first start a job with the least amount of chemical you think it will take and work up. Do not start high and think you can work down. Most operators will never dial it down to the same lower level that they could have cleaned with had they started the other way. This has also been proven in washer tests.

Sometimes all you need for the soap to work well is softer water. You can spend pennies per gallon on a water softener like our “So Soft” that will help your soap work better. It will also promote the sheeting off of water for vehicles and houses to dry faster. Or our “Booster” that will stretch the amount of soap you use. Adding “Quick Dry” to rinse water also aids in the sheeting action or our “Spray Wax” to leave cars or vinyl siding with a nice shine.

Please add your comments on how you save on product cost, additives you might put in like bleach or any other suggestions. Also if you have any questions about these suggestions as to how we can help you save money, just ask.